Moses technology in a stone simulator
DOI:
https://doi.org/10.5489/cuaj.4797Abstract
Introduction: The objective of this study was to compare fragmentation efficiency of the conventional regular mode of holmium laser to the Moses contact mode on a stone simulator.
Methods: The Lumenis® PulseTM P120 H holmium laser system, together with Moses D/F/L fibers were used to compare regular mode with Moses contact mode in a stone simulator model using flexible ureteroscopy with artificial stones. Efficiency of laser lithotripsy was measured by procedural time. Degree of stone retropulsion was also compared between regular and Moses modes using a Likert scale from 0 (no retropulsion) to 3 (maximum retropulsion).
Results: Using the stone simulator model, a significant reduction in stone retropulsion was noticed when comparing regular mode to the Moses contact mode (mean Grade 2.5 vs. Grade 1; p<0.01). When compared with the regular mode, the Moses contact mode was associated with significantly shorter procedural time during fragmentation (13.9 vs. 9.1 minutes; p≤0.01) and dusting (9.3 vs. 7.1 minutes; p≤0.01). In addition, when compared with the regular mode, the laser pedal was pressed significantly less often with the Moses mode during fragmentation (86 vs. 43 times; p<0.01) and dusting (50 vs. 26 times; p<0.01). Moses contact mode was associated with significantly higher percentage of lasing vs. pausing when compared with the regular mode for both fragmentation (0.8 J/10 Hz) and pulverization (0.4 J/50 Hz) settings (both p<0.05).
Conclusions: Using the stone simulator setup, Moses technology was associated with more efficient laser lithotripsy (shorter operative time) due to significantly reduced stone retropulsion.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
You, the Author(s), assign your copyright in and to the Article to the Canadian Urological Association. This means that you may not, without the prior written permission of the CUA:
- Post the Article on any Web site
- Translate or authorize a translation of the Article
- Copy or otherwise reproduce the Article, in any format, beyond what is permitted under Canadian copyright law, or authorize others to do so
- Copy or otherwise reproduce portions of the Article, including tables and figures, beyond what is permitted under Canadian copyright law, or authorize others to do so.
The CUA encourages use for non-commercial educational purposes and will not unreasonably deny any such permission request.
You retain your moral rights in and to the Article. This means that the CUA may not assert its copyright in such a way that would negatively reflect on your reputation or your right to be associated with the Article.
The CUA also requires you to warrant the following:
- That you are the Author(s) and sole owner(s), that the Article is original and unpublished and that you have not previously assigned copyright or granted a licence to any other third party;
- That all individuals who have made a substantive contribution to the article are acknowledged;
- That the Article does not infringe any proprietary right of any third party and that you have received the permissions necessary to include the work of others in the Article; and
- That the Article does not libel or violate the privacy rights of any third party.